Description: Works on all Heritage 22ca revolvers made after 2001 that are not equipped w/a stock ejector rod built in.New never used.Makes a nice addition to your "Old Western" looking collection. When using,SAFETY FIRST:Use of replacement handheld ejector rod for your Revolver:UNLOADING 1. Always keep the revolver pointed in a safe direction. 2. Hold the revolver with your left hand. 3. Push the hammer block up in the safe position. 4. Pull the hammer back to the second notch (or click) and the cylinder will turn freely. 5. Open the loading gate to expose the chambers. 6. Hold the ejector rod handle with two fingers. 7. While keeping your hand away from the muzzle, line up the ejector rod with the exposed cylinder chamber and push out the cartridge. 8. Rotate the cylinder to line up the next chamber. 9. Repeat this cycle until all chambers are empty. 10. Double check that each chamber is empty.
Price: 16 USD
Location: Pendergrass, Georgia
End Time: 2024-11-18T14:30:57.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Heritage Manufacturing, Inc
For Gun Make: Rough Rider
Type: Ejector Rod
Gauge/Caliber: 22lr + 22wmr/mag
Item Height: 1
Model: rough rider
MPN: Does Not Apply
For Gun Type: Handgun
Item Length: 5
Item Weight: 2
Item Width: 1
