FTTH ONT Stick GPON SFP Huawei SmartAX MA5671A 34060980-002 Rooted firmware

Description: Certainly! Here's a simplified English instruction manual for the Huawei MA5671A ONT (Optical Network Terminal) :---Huawei MA5671A Setup Guide1. Cable Connections:1. Insert the Huawei MA5671A into the SFP port of the optical receiver.2. Connect the RJ45 network cable from the optical receiver to a home network switch or router.*(Note: The home network segment must be 192.168.1.x. Otherwise, you will not be able to access the MA5671A backend. If it's not, please change it to this segment.)*2. Configuration:1. After completing the above connections, log in to the router backend and you should see a new device with IP 192.168.1.10, which is the Huawei MA5671A.2. Within the local network, enter 192.168.1.10 in your browser's address bar to access the Huawei MA5671A backend.- **Username**: root- **Password**: null3. In the Huawei MA5671A backend, set the LOID and VLAN ID (you may need to enter the original optical modem's super admin backend to obtain these):- **GPON SN**: 12-digit SN (usually on the back of the optical modem)- **LOID**: Fill in the LOID you obtained- **Logic Password**: Usually leave blank- **PLOAM Password**: Fill in the password you obtained4. After successful configuration, save and apply, then restart the Huawei MA5671A and check the registration status (ensure the optical cable is connected).3. Important Notes:1. The optical network path must be GPON or XGPON. EPON users cannot use this device (please check before purchasing, non-refundable if incorrect).2. Ensure LOID and VLAN ID are correctly set to register normally.---This guide helps you set up and configure the Huawei MA5671A ONT to ensure a proper connection and functionality within your home network.

Price: 39.99 USD

Location: Hengyang City, Hunan

End Time: 2024-08-04T09:21:12.000Z

Shipping Cost: 0 USD