Darkglass M200 Microtubes Bass Head, 200W, Black

Description: A used like new 200W DarkGlass Bass Head! Amp-head, manual, and power-cable in all included in it's original packaging. I put about 3-4 months worth of practice on this only running it into my headphones. No electronic issues, I just decided to upgrade to an amp-head with compression and with more power for a cabinet setup I eventually wanted to run as I've gotten much more into playing bass. No dings or scratches. This is the perfect amp-head if you want something to practice and learn on with a pair of headphones, but can also run a modest cabinet setup down the line if you stay interested in bass guitar. You can't go wrong with something that sounds crisp and clear and will allow to also have modern distortion as needed. Front Panel FeaturesInput Use this jack to connect your instrument via a standard ¼” mono cable.Drive This knob controls the amount of distortion that the Microtubes B3K® Engine will deliver. It will change from a soft warm overdrive to a massive modern distortion sound.Blend Use this knob to mix between the Clean signal and the Distortion signal (Microtubes B3K® Engine).Bass +-12dB at 80Hz. Use this knob to change the low-end content of the signal.Low Mids +-12dB at 1kHz. This knob controls the low mid content of the signal.High Mids +-12dB at 3kHz. This knob controls the high mid content of the signal.Treble +-12dB at 5kHz. Use this knob to change the high content of the signal.Master/Mute Use this knob to control the overall volume of the amplifier. Use this push knob button to mute the amplifier.Back Panel FeaturesSpeaker Output Use this connector to connect the amplifier to your cabinet. This Speakon combo jack allows for either Speakon or ¼” speaker cable operation. WARNING: Do not use an instrument cable with this jack. Using an instrument cable can damage your amplifier. Minimum load 3Ω.Ground Lift Use this control to lift the ground of the DI XLR output. If you are experiencing ground noise in your DI signal try changing the setting of this control.DI Output Use this connector to send your bypass signal to the console, mic preamp, interface, etc. The DI OUTPUT delivers only the bypass DI signal.Headphone Output Connect your Headphones and enjoy the analog cabinet emulation.Aux In Use this connector to play music from your laptop, phone, MP3 player, etc. This input is routed only to the headphone output without cabinet emulation.AC Socket Use this connector to feed electric power to the amplifier. 100 - 230 VAC, 50-60Hz.AC Power ON/OFF Use this Switch to release the audio energy from your bass.

Price: 320 USD

Location: Trenton, New Jersey

End Time: 2024-12-11T15:05:39.000Z

Shipping Cost: N/A USD