Andersen 2" Alumistinger Hitch Receiver Ball Mount Drop w/ 2" Hardball Tow Ball

Description: Andersen 2" Alumistinger Hitch Receiver Ball Mount Drop w/ 2" Hardball Tow Ball Andersen Alumistinger 2" Hitch Receiver Draw Bar 2" Drop/Rise with 2" Greaseless Hardball This Listing is For: ONE (1) - 2" Aluminstinger Draw Bar #3503 2" Drop / 1" Rise ONE (1) - 2" Greaseless HardBall #3662 8,000 lb Towing / 800 lb Tongue Capacity ALUMINSTINGER #3503 - 2" DROP / 1" RISE Andersen Manufacturing’s often copied but never equaled Alumistinger was the first aluminum ball mount in the towing industry. With its unique stand-out appearance the Alumistinger ball mount offers boat, snowmobile, ATV, and utility trailer owners the highest quality and best looking ball mount hitches on the market. The Alumistinger is made of one solid piece of aluminum alloy with no welds, giving it all the strength and durability you need. Is aluminum really strong enough for use in a ball mount? When Andersen Manufacturing Inc. first released the Alumistinger solid aluminum ball mount, many in the industry figured we were doomed to failure. But, after many years and many miles of problem free service the industry had to change its tune. In fact, many companies have released remarkably similar products. When you decide to step up from your rusty steel hitch to the great look of aluminum, remember Alumistinger was first! Insist on the Original! Alumistinger ball mounts will never rust and are much lighter than standard steel ball mounts of similar strength. The aluminum looks great by itself, so there is no need for paint or chrome that will chip and peel. To keep the shine, you simply need to polish the hitch from time to time and you will have a high gloss surface that looks brand new 2" Drop or 1" Rise Drop/Rise measurements are taken from the top of the receiver opening to the top of the surface on which the ball rests Length from center of hitch pin hole to center of ball hole: 7" Ball hole diameter: 1" Thickness of ball platform: 1" Material : 6061 T6 Aluminum alloy (solid bar) Fits 2" x 2" standard receivers (2.5" to 2" sleeves sold separately) 8,000lb GTWR and 800lb tongue weight No Paint - No Rust - Forever Meets SAE J684 and V5 certification standards Locking pins available Works with Greaseless HardBall (see our other auctions) Fully tested by an independent lab Available in other sizes: 2", 4", 6", 8", and 10" drops Made in the USA If you need more weight capacity on your hitch than the 8000 lbs offered by the Alumistinger tow bar, please look at our Original Rapid Hitch also available on our other listings. Don’t be confused with the knockoffs of our original aluminum hitches made by: DT, Reese, Valley, and Buyers. Insist on the Original! We are an authorized full line distributor of Andersern Mfg. Products. If you need something specific, drop us a line we can get any item available. GREASELESS 2" HARD BALL #3662 The Greaseless HardBall eliminates the need to ever add lubricants to the coupler or ball. The ball is made of plated steel and the 1/8" thick cap reduces wear and tear on the ball and coupler. The 1/8" nylon cap comes with a lifetime replacement warranty thru Andersen. Greaseless HardBall - never have to lubricate ball or coupler! 2" Zinc Plated Steel Ball with 1/8" Nylon Cap Towing capacity: 8,000 lbs. Fits AlumiStinger and all traditional ball mounts with 1" hole. Meets V5 and SAE J684 certifications. Includes wrench flats for easy installation Ball diameter: 2" Shank diameter: 1" Shank length: 2-1/8" Thread count for shank of ball: 14 threads per inch Made in the USA SEE OUR OTHER LISTINGS FOR OTHER SIZES AND MODELS!!! Part # AMH-3503/3662 Powered by SixBit's eCommerce Solution

Price: 80 USD

Location: La Palma, California

End Time: 2024-11-11T02:28:21.000Z

Shipping Cost: 0 USD